Rely on the most important features

Check what we can do for You

Review the best and most important PVManage features.

Shell

Shell, Channel & Boot Elements

Defining Each Shell as a Part

In PVManage software, all the three ways are devised and you can choose among them according to your taste. However, as the software designer, I present to you the best way. If you enter each shell as a part, you have chosen the best and the fastest method, provided that you consider each part as a shell when its diameter, thickness, and material are all the same. In other words, if your given shell has the same diameter, thickness, and material – regardless of its length- present it as a part in the software. The software will automatically provide you with its constituent parts!

Manage Nozzle Data & Attachments

Nozzle page contains the most data value in PVManage software. We also have the most number of subsidiary pages on this page. The simplicity of the form is maintained in order to avoid the large amount of complexity and density in the subsidiary forms. However, inserting the subsidiary data is considered through certain measures, as well. Intelligent manner of controlling inter-related data is one of the most important factors taken into account in designing this page. It is applied in 6 types below:

Size x Rating – Standard x Size
Size x Schedule – Standard x Facing
Size x Type – Standard x Type

Nozzle

With all attachments

Support

Horizontal & Vertical Types

Manage Support Data

Each equipment can appropriate the data of only one Support. On that basis, the page which opens at the time of inserting each item’s Support data is in accordance with what you have defined for it in “Design Data” page. If the type of Support alters through time and due to any reason, you have to correct it in “Design Data” page first, and then retry to enter the new Support data. In this case, the old Support data will be removed from the software automatically. Therefore, keep in mind that in case you try to change the Support type, you must enter the new Support data immediately. This is due to the reason that in case you have not entered the new data and try to make either the material list or the part list, the related support data has not been taken into account!

With the Least Need for Information

We can insert dimensional data for any nonstandard Flange or Girth Flange. There are fields concerning entering data for diameter and the number of Stud Bolts on this menu which are merely used to calculate the real weight of Girth Flange. You must be wary that completing these data will not result in including any Stud Bolt in the program, and in case you need related Stud Bolts in addition to Girth Flange, you must insert them on Extra Part as Stud Bolt page. Moreover, remember that the dimensions recorded in diameter and thickness fields come after machining. Thus, if you intend to order raw materials so as to do the machining in your own organization, do not disregard noting the required extra.

Exchanger Elements

Any TEMA Type

Nesting

Profiles & Plates

Nesting Philosofy

One-Dimensional Nesting
We require one-dimensional Nesting when the authenticity of the pieces limits to their material and cross section. This situation resembles the time when we want to estimate the materials for a metal construct project or a Piping one. In this case, equal pieces in both size (with regard to cross section) and material can be placed by one another.

Two-Dimensional Nesting
We require two-dimensional Nesting when the authenticity of the pieces includes their material and thickness. The pieces’ direction gains significance in two-dimensional Nesting, as well, and we cannot place each piece along with the main plate’s length or width. Two-dimensional Nesting is applicable to sewing industries, printing, glass industries, cabinet industries, metal industries, and any other activity which requires any form of superficial layout. Since any sort of inaccurate or non-optimized combination can cause material waste in two dimensions, the importance of achieving the best layout in Nesting increases.

Manage Bodt Flange

By Body Flange, we mean any flange which is attached directly to the equipment regardless of its service and function and without any need to nozzles. If you enter the nozzle data on the Nozzle Page, the software will automatically calculate its nozzle and consider it in material estimation. On the Nozzle Page, thus, concepts such as Nozzle Location and Nozzle Projection gain significance.
However, in case you have a flange which is set directly on your equipment, enter its data on this page.

Body Flange

As Standard Size

Fittings

Without Limitation

Any Kinds of Standard Fittings

There is no specific point about inserting Fitting data. The only point to be mentioned is that you will have two options when completing Material Index data, since the material of Fittings which are placed inside the vessel might differ from that of those placed outside of the vessel. Therefore, if Fitting Location is adjusted on Internal, Material field will be automatically completed with the material of the Internal Fitting. In contrast, the Material field will be automatically completed with the material of the External Fitting if the Fitting Location field is adjusted on External.

Entering Stiffener Data

If the reinforcing plate is in contact with the equipment through width, you have to define it as Shell Type. In that case, the defined plate will be defined in the software as a piece of Shell Type, and when preparing cutting plan, the plate will be considered as a piece of Shell with a width equal to the ring’s width (which you have entered in the Ring Width field); its internal diameter equal to the equipment’s external diameter, and its external diameter equal to the internal diameter + two times the thickness of the ring (which you have entered in the Ring Th’k field). The importance of this issue lies in the fact that when constructing the Shell Type piece, the placement of the Shell’s diameter on the plates longitudinal is of utmost significance.

Stiffeners

Plate Or Profile Type

Integrated and Accurated Reports

Prior to introducing the reports, it is significant to bring into light some key issues:
1. Variety, Accuracy, Rapidity, and Up-to-date quality of reports that PVManage software presents form one of the strong Points of it.
2. All reports in PVManage software include title, date, time, and the producer’s name. Therefore, all the reports are documentary and there is no need for them to be documented.
3. None of the reports are saved in PVManage software. Thus (and according to items mentioned in part 1), all reports are produced by the user at the time of request. Applying edition on reports, hence, is an unnecessary topic. The validity of each report is based on the latest data entered in the software by the request time.
4. If you require archiving and maintaining the reports’ previous versions, you have to consider an area on your computer to save and archive them as wanted.
5. Each movement within the software is both track able and reportable. The possibility of reporting is devised on all pages.
6. Reports will be generated as soon as possible and this process does not consume your time. Therefore, click on the related icon whenever you need a report!
7. Item Reports Menu is used to extract data related to an item (and in cases a group of items). To produce each report, except for Paint, Weld, and Compare Report, you are required to select the respective item from the Drop Down List first and then click on the desired report’s icon.

Fast & Agile

There are other side tools required to work with PVManage software, which are gathered on Tools page. Results of using these tools are at times transferable to the software’s data bank and at others to the respective fields, which will be explained where appropriate.
Ladder & Platform tools serve as the most important tools on this page. Using these tools, you can estimate the required materials for Ladder & Platform by entering the least data and, if willing, transfer them to the software’s data bank. Keep in mind that you are equipped with separate tools for Ladder & Platform on Nesting page, and you will be able to prepare cutting plans for these materials independently. Although required materials for Ladder & Platform are generally classified in Profile group, they are categorized autonomously on Nesting page, due to the fact that constructing such accessories are managed and pursued independently from pressured equipment.

Special Tools

Practical & Miscellaneous

Cost Estimation

Material & Fabrication

Fast, Economical and Unique Estimation 

One of the most fascinating and the most practical sets of reports provided by “PVManage” are the reports on estimating the fabrication costs and calculating the equipment’s final price(s).
If you have incorporated (into the software) the dimensional data of the equipment as well as the technical features of all the component parts, you can extract the thematical (subjective) reports of fabrication activities from the software. In addition, by defining the unit prices for each activity, you can easily access the final price of each activity and as a result, the fabrication price of each equipment and project.

Just By One Click!

One of the most exciting achievements of PVManage software is DXF providing!
Any data entered into the software and have capability to provide a sketch, will be change into an ACAD format drawing with the minimum time by the software.
It’s necessary to advise that based on the PVManage nature which reserve information of any subject part by part (and mainly separated each other), providing of fabrication drawings will be the same too. Look at the following example for more explanation:
Suppose that you entered related information for a Shell or an Head for a horizontal vessel separately. At the time of entering data, no data related to the location of these subjects asked you. For example, it’s not important for the software to identify the Head is located on the left side or right side of the vessel (because of it’s not related to the PVManage nature). So, it doesn’t matter if the software can provide a drawing that displays this head exactly where the user wants it. Or there is a same reason about the parts of a Shell.
But providing of the Head as a separated piece drawing and show it’s dimensions, and other related information is logic and possible.
Thus the software provides related piece drawing from each records and save in a predefined path. These part drawings will be as the detachable parts and user can assemble them together as an integrated drawing.

Provide Drawing (DXF)

Sketches as Separated Files

How to estimate quickly and accurately?

From now on, leave your projects to us for estimation and receive the results in the shortest possible time (i.e. a few hours after sending the information) and participate in tenders with peace of mind and have the technical and financial estimate of your project.
Our estimates are included:

Row Material Including 1-D & 2-D Nesting
Volumes of Construction Activites
More Than 200 Types of Related Reports
A Set of DXF Collections

Visit our office if you want

+1(91)401-6531

+90(531)733-6949

Have a problem? [email protected]